configure, test, and support the printers, scanners, and other peripherals used with

this particular kiosk.

Each workstation (computer) must be customized individually. Once your Workstation Management settings have been saved, you will not need to set these again unless the station's default internet browser has its cookies deleted. This can happen through routine maintenance, security settings, or a computer restart.

Access Workstation Management from the Image Added Actions menu in each Kiosk.

Image Added

Information

Displays all pertinent system information for KeepnTrack.

Station

Where you enable your Kiosk settings for signing in/out and taking pictures.

Printers

Where you will configure your Dymo or Star Network printer settings to print badges/slips. 

Scanners & Cameras

Test your scanner and/or camera to ensure it is working. It also contains links to hardware drivers and installation guides. 

This window provides you with general information about your KeepnTrack system and the installed devices that it supports; this includes your current operating system, browser, and any compatible hardware components connected to the machine.

Image Modified

The local settings for each kiosk are stored via “cookies”, which allows each kiosk to be customized to fit your needs and your settings will be remembered. The Station settings are relatively the same for each kiosk, but there are some differences.

Attended Kiosk 

Image Added

Station Settings

Camera & Printer Settings

From the dropdown menu, choose Camera or Printing to view and edit those settings.

Camera

Require Picture. When checked, people signing in will have their photo taken at the kiosk. The camera must be enabled for this setting to work properly.

Next, choose if the camera will or will not be shown for each person classification:

• Show Camera
• Don't Show Camera

Printing

Choose whether a badge is printed every time a Visitor, Vendor, Volunteer, Student, or Staff member signs in or out from this kiosk.

Self-Service Kiosk

Anchor
selfservice selfservice

Image Added

Station Settings

Camera and Printing Settings

From the dropdown menu, choose Camera or Printing to view and edit those settings.

Camera

Require Picture

. When checked,

people signing in will have their photo taken at the kiosk. The camera must be enabled for this setting to work properly.

Next, choose if the camera will or will not be shown for each person classification:

• Show Camera
• Don't Show Camera

Printing

Choose

whether a badge is printed every time a Visitor, Vendor, Volunteer, Student, or Staff member signs in or out

from this kiosk.

Express Kiosk  

The Express Kiosk does not use a camera, but you can manage your printing settings for each classification.

Image Added

Station Settings

Printing

Choose whether a badge is printed every time a Visitor, Vendor, Volunteer, Student, or Staff member signs in from this kiosk.

These settings allow you to configure the printers being used with your KeepnTrack Kiosk. You may also test whether your slips and labels are printing properly.

Links to the

printer drivers and installation guides are on the bottom right.

Image Added

Printer Settings

1. For each badge and slip type, choose which printer it will be sent to from the dropdown menu: No Printer, Network Printer, USB Badge.
2. If you select Network Printer, enter the printer's IP address, then choose the format type: Standard or No Picture.
3. Finally, test your settings to make sure your printers work.

USB Printer Options

The Badge and Slip Printer drop-down menus contains the following options:

No Printer

Select this option if no printer is attached to this Kiosk and will not be printing any badges or slips.

LabelWriter 400

This is the main type of printer associated with KeepnTrack Kiosks. Select the LabelWriter 400 if you have a DYMO LabelWriter 400 or a DYMO LabelWriter 450.

See https://www.dymo.com/compatibility-chart.html

LabelWriter Twin Turbo

The LabelWriter Twin Turbo printer model consists of two printer heads housed under a single unit. There are two trays that it prints from, a left and right roll. Contact KeepnTrack Customer Support for more information on this printer type.

See https://www.dymo.com/compatibility-chart.html

Left Roll

Select what is printed on the left roll of the printer. For example, Colored Labels for visitor badges.

Right Roll

Select what is printed on the right roll of the printer. For example, Continuous Wide Paper for student tardies.

Default Roll

Select which roll prints as the default if no roll is specified. Specify the roll for each activity in Activity Management.

Both the badge and slip printers are capable of printing to the standard adhesive badge Colored Labels (30256) or to Continuous Wide Paper (i.e. slip).

Settings

• Barcode Scan.

• Test any 1D or 2D barcode scanner with KeepnTrack.

• Look for Camera.

• Enable your Kiosks to use a built-in or attached web camera to take the person's picture before picking an activity. If they already have a picture on their record, the operator has the option to retake the picture on the Activities screen.
  

• Activate Camera.

• Activate a live stream from your built-in or attached web camera.

• Reset Window. If any of your hardware (i.e. scanner or webcam) is not plugged in when the browser is loaded, this button give you the option of reinitializing the hardware.

Driver's License Scanner

• Scan ID. Initiates the scanning/data collection process for your KeepnTrack-compatible Driver's License Scanner. The information scanned will be displayed in the window directly beneath the State ID mage. If the information is not being captured correctly, click the button to send the image directly to KeepnTrack Support.

• Calibrate. This button is used with the optical scanner. Insert the calibration sheet and click this button to calibrate the Driver's License Scanner.

• Clean. This button is used with the optical scanner. Insert the cleaning sheet and click this button to clean the Driver's License Scanner

• .